- Home
- Tools & Solutions
- Torque Measurement Systems
- Measurement systems accessories
- Other measurement systems accessories
- DWTA 30
DWTA 30 Nm
DWTA quality wrench 30Nm.
DWTA 30 Technical Description
| Part Number | 6151657600 |
|---|---|
| Feedback type | Acoustic Buzzer and Leds on Delta 7D |
| Lever arm length | 320 mm |
| Compliance | ISO 6789:2017 & VDI-VDE 2645 - Part 3 |
| Min torque | 3 Nm |
| Tightening strategies | Yes |
| Drive (mm) | 9x12 |
| Quality strategies | Yes |
| Drive (in) | 0.35x0.47 |
| Power supply | 2 or 5m Cable to Delta 7D data collector (embedded Battery or ext. power supply) |
| Output drive type | Sq |
| Accuracy (ID accuracy_measurement tool) (%) | ±1% on torque reading value from 10% to 100% of nominal torque (CW and CCW) |
| Side to Center | 22.5 mm |
| Min torque | 2.2 ft.lbf |
| Autonomy (h) | 16h on Delta 7D h |
| Weight | 0.8 kg |
| Overload torque | 26.6 ft.lbf |
| Max torque | 22.1 ft.lbf |
| Unit measurement supported | N.m, lbs.ft, lbs.in, oz.ft, oz.in, kgf.m, kgf.cm, k.pm, d.Nm, degree |
| Output drive size (in) | 3/8 |
| Family | Manual torque wrenches |
| Length without ratchet | 402 mm |
| Subfamily | Digital torque wrenches |
| Tightening direction | CW and CCW |
| Type class | Type I, Class 3 |
| Curves memory capacity | 10 |
| Communicating | Yes |
| Results memory capacity | 5000 (on Delta 7D) |
| Overload torque | 36 Nm |
| End-fitting management | No |
| Angle measure | Yes |
| Max torque | 30 Nm |
